Austin Hughes Electronics CS-148 User Manual

User ManualCS116 / 148 Cat5 IP Serial Console- 1U 16, 48 ports- Remote IP access using SSH or telnet clients

2.2 Membrane Chapter 2 Power ON Turn off all devices / servers and Cat5 IP serial console Make s

2.3 Device Setup Chapter 22.3.1 Setup the IP address from Console Port The IP serial console offers user-frie

2.3.2 Setup the IP address from Ethernet port In addition to VT100 interface, we also provide a Network Setup Software tool (IPCS Setup) for t

2.3.3 Web Management Interface The IP serial console (IPCS) supports both HTTP and HTTPS (HTTP over SSL) protocols. The user must authentica

User can do the network IP settings via V-100 or web pages. This chapter describes the usage of web pages. The default IP settings are as follows.3.1.

3.2.1 IP Filtering The IP filtering function keeps unauthorized hosts from accessing to the IP serial console by specifying IP filtering rules. It

3.2.1 IP Filtering Users can add a new IP filtering rule by setting the properties at adding line and th

3.3.2 Dynamic DNS When users connect the IP serial console (IPCS) to a DSL line or use a DHCP configuration, and get a

3.3.4 RADIUS Authentication is the process of identifying an individual, usually based on a username and password. The IP se

Under the Serial Port heading, click Configuration will show the list of port summary as below. 4.1.1 Port Authentication Auth

Chapter 1 Getting Started1.1Important Safeguards...11.2Regulatory Notice...

4.1.3 Port Title Users can enter descriptive information for each port based on the device attached to it. We can use the sho

4.1.4 Operation Modes The IP serial console unit provides four types of operation modes. These are described in the followi

Console Server Mode Configuring a serial port as a console server creates a TCP socket on the IP serial console unit that listens for a Telnet

4.1.5 Serial Port Parameters To connect the serial device to the IPCS serial port, the serial port parameters of th

4.1.6 Port Logging If Port logging option is enabled, the user can let the IP serial console to search a defined keyword from the

4.2.1 Telnet Java Applet 1. Select Telnet protocol under Serial port > Configuration > Operation mode.

4.3.1 Serial-to-Serial Function Normally the data transfer of IPCS is between Ethernet port and serial ports. With Serial-to-Serial

5. Confirm the choice the screen below will show up. 6. Type in user name and password. Then the data channel connection bet

5.1.1 System Status System status data include the model name, serial number, firmware version, bootloader version, current time,

6.1.1 User Administration At startup of the AP, the system will prompt user to enter the password to access to th

Chapter 8 Optional Specifi cations8.1DC Power Options...34Chapter 9 FAQ...

6.1.3 Remove User To remove a user, Check the users at the User administration screen Click

The IPCS maintains current date and time information. The IPCS clock and calendar settings are backed up by internal battery power. Th

Firmware can be easily upgraded via web page. This section describes the upgrade procedures. *Pls contact you The latest firmware version

6.3.2 Upgrade from web page If you want to run the new firmware, you need to click the Reboot item, then Yes to confirm to reboo

P. 31Item DescriptionForm Factor 1U rack mountingSerial InterfaceNumber of port 16-port / 48-portConnector RJ45Signal Serial RS-232 Rx, Tx, RTS, DTR,

P. 327.2 Connector Pin Assignment Chapter 7 Console port & serial port pin assignment Pin Signal Direc

P. 33 Well-known TCP/UDP Port Numbers Port numbers are divided into three ranges: Well Known Ports, Registered Ports, and Dynam

P.34Model 12V 24V 48VInput ratingInput voltage: 12-Volt 24-Volt 48-VoltInput range: 9 ~ 18V 18 ~ 36V 36 ~ 75VInput current- No load 50 mA 50mA 50 mA-

P. 359.1 FAQ Chapter 91. What devices and servers can the CS-116 / CS-1

P. 3610.1 Dimensions Chapter 10ModelProduct Dimension (W x D x H)Packing Dimensi

P. 11.1 Important Safeguards Chapter 1Please read all of these instructions carefully before you use the device. Save this manual for future refer

The company reserves the right to modify product specifi cations without prior notice and assumes no reponsibility for any error which may appear in th

P. 21.2 Regulatory Notice Chapter 1Legal InformationFirst English printing, October 2002Inform

P. 31.3 Package Contents Chapter 1Cat5 IP serial console x 1 pcRJ45-DB9 female adapter x 1 pcRJ45-DB9 male adapter x 1 pcScre

P. 4 It is very important to locate the Cat5 IP serial console in a suitable environment. The surface for placing and fi xing the Cat5 IP serial

P. 51.8 Installation Chapter 1CebyrVeiwCebyrVeiw Install each bracket using screws pro- vided shown in Figure 1. Fix the Cat5

P. 62.1 Connection Diagram Chapter 2CS-116Ethernet ConsoleSerial portConnectionConnectionCat5 IP Serial ConsoleSG-